Access provided by Rice University


Abdel-jawad MM, Mee DJ and Morgan RG (2007) New calibration technique for multicomponent stress wave force balances, Review of Scientific Instruments, 78: 1-7.
Anderson JD Jr (2006) Hypersonic and High-Temperature Gas Dynamics, AIAA Education Series; ZEd: J.A. Schetz, Second Edition, American Institute of Aeronautics and Astronautics, Virginia.
Ardasheva MM, Nevskii LB and Pervushin GE (1985) Measurement of pressure distribution by means of indicator coating, Journal of Applied Mechanics and Technical Physics 26(4): 469-474.
CrossRef
Bathe KJ (1997) Finite Element Procedures, Prentice-Hall of India Private Limited; New Delhi.
Bernstein L (1975) Force measurements in short-duration hypersonic facilities, AGARDograph 214.
Bernstein L and Stott GT (1982) A laser-interferometric trajectory-following system for determining forces on a freely flying models in a shock tunnel, 13TH International Symposium on Shock Waves and Shock Tubes, Niagara Falls, New York.
Bertin JJ and Cummings RM (2003) Fifty years of hypersonics; where we've been, where we're going, Progress in Aerospace Sciences, 39: 511-536.
CrossRef
Carbonara M (1993) Aerodynamic force measurements in the VKI Longshot Hypersonic Facility, New Trends in Instrumentation for Hypersonic Research: Ed. A. Boutier, NATO ASI Ser. E, 224: 317-325.
Charles EW and Merle RW (1962) Heat transfer to slender cones in hypersonic air flow including effects of the yaw and nose bluntness, Journal of Aerospace Sciences, 29(7): 761-774.
CrossRef
Dale G, Baust H, Tyler C, Jordan J, Weaver W and Clinehens G (1998) Pressure sensitive paint measurements in very low-speed flows, Proceedings of Sixth Annual Pressure Sensitive Paint Workshop, The Boeing Company, Seattle, Washington, October 06-08; 16-1 to 16-6.
Daniel WJT and Mee DJ (1995) Finite element modelling of a three-component force balance for hypersonic flows, Computers and Structures 54(1); 35-48.
Doebelin EO (1980) System Modelling and Response: Theoretical and Experimental Approaches, John Wiley and Sons, New York.
Doolan CJ and Morgan RG (1999) A two-stage free-piston driver, Shock Waves 9: 239-248.
CrossRef
East RA and Hillier TJ (1985) Free-flight oscillatory experiments in a hypersonic gun tunnel, 15TH International Symposium on Shock Waves and Shock Tubes, Berkeley CA.
Gallery J, Gouterman M, Callis J, Khalil G, McLachlan BG et al (1994) Aerodynamic temperature measurements by luminescence imaging, Review of Scientific Instruments 65(3); 712-720.
CrossRef
George RD and James FM (1968) An improved piezo-electric balance for aerodynamic force measurement, IEEE Transactions on Aerospace and Electronics System, AES-4 (3): 351-359.
CrossRef
Holden MS (1985) Experimental studies of the effects of axi-symmetric transition on the aerothermal characteristics of hypersonic blunted slender cones, AIAA Paper 85-0325 (1985).
Houck SW, Hepp RG, Morris MJ and Benne ME (1996) Pressure sensitive paint flight test, IEEE Aerospace Applications Conference, Aspen Co, February 03-10; 4: 241-252.
Hubner JP, Carroll BF, Schanze KS and Ji HF (2000) Pressure-sensitive paint measurements in a shock tube, Experiments in Fluids 28: 21-28.
CrossRef
Hubner JP, Carroll BF, Schanze KS, Ji HF and Holden MS (2001) Temperature and pressuresensitive paint measurements in short-duration hypersonic flow, AIAA Journal, 39(4): 654-659.
CrossRef
Itoh K, Komuro T, Sato K, Tanno H and Ueda S (2001) Hypersonic aerodynamic research of HOPE using high enthalpy shock tunnel, AIAA Paper 01-1824.
Jessen C and Gronig H (1989) A new principle for short duration six component balance, Experiments in Fluids 8: 231-233.
Joarder R and Jagadeesh G (2004) A new free floating accelerometer balance system for force measurements in shock tunnels, Shock Waves 13: 409-412.
CrossRef
Joshi MV and Reddy NM (1986) Aerodynamic force measurements over missile configurations in IISc shock tunnel at M∞ = 5.5, Experiments in Fluids 4: 338-340.
Jules K, Carbonaro M and Zemsch S (1995) Application of pressure sensitive paint in hypersonic flows, NASA TM-106824.
Lam LY and Stollenwerk J (1966) Aerodynamic force measurement of free-flight models in a hypervelocity shock tunnel, AIAA Paper 66-771.
Lu FK and Wilson DR (1994) Survey of short duration, hypersonic and hypervelocity facilities, AIAA Paper 94-2491.
Marqart EJ and Coulter SM (1998) Impulse measurement technology development at Arnold Engineering Development Center (AEDC), AIAA Paper 98-203.
McDevitt JB and Larson HK (1966) Atechnique for launching free-flying models in conventional wind tunnels, AIAA Paper 66-773.
McLachlan BG, Bell JH, Kennelly RA, Schreiner JA, Smith SC et al (1992) Pressure sensitive paint for use in supersonic high-sweep oblique wing (SHOW) test, AIAA Paper 92-2686.
McLachlan BG, Bell JH, Espina JH, Gallery J, Gouterman M et al (1992a) Flight testing of a luminescent surface pressure sensor, NASA TM-103970.
Mee DJ, Daniel WJT and Simmons JM (1996) Three component force balance for flows of milliseconds duration, AIAA Journal 34(3): 590-595.
CrossRef
Mee DJ (2003a) Dynamic calibration of force balances for impulse hypersonic facilities, Shock Wave 12: 443-455.
CrossRef
Mee DJ (2003b) Dynamic calibration of force balances, Research report number 2002/6, Department of Mechanical Engineering, University of Queenland, Australia.
Modarress D and Azzazy M (1988) Modern experimental techniques for high speed flow measurements, AIAA Paper 88-0420.
Naumann KW, Ende H and Mathieu G (1991) Techniques for aerodynamic force measurement within milliseconds in shock tunnel, Shock Wave, 1: 223-232
CrossRef
Naumann KW, Ende H, Mathieu H and George A (1993) Millisecond aerodynamic force measurement with side-jet model in the ISL shock tunnel, AIAA Journal 31(6): 1068-1074.
CrossRef
Platou AS (1968), The wind tunnel free flight testing technique, AIAA Paper 68-388.
Porter IM, Paull A, Mee DJ and Simmons JM (1994) Shock tunnel measurements of hypervelocity blunted cone drag, AIAA Journal 32(12): 2476-2477.
CrossRef
Ramesh R (2001) Thin flat balances for testing thin delta wings at hypersonic speeds, Measurement Science and Technology 12: 1555-1567.
CrossRef
Raju C and Reddy NM (1990) Aerodynamic force measurements over missile configurations in IISc shock tunnel at M∞ = 3.85 and 9.15, Experiments in Fluids, 10: 175-177.
Robinson MJ, Mee DJ, Tsai CY and Bakos RJ (2004) Three-component force measurements on a large scramjet in a shock tunnel, Journal of Spacecraft and Rockets, 41(3): 416-425.
CrossRef
Robinson MJ, Mee DJ and Paull A (2006) Scramjet lift, thrust and pitching moment characteristics measured in a shock tunnel, Journal of Propulsion and Power, 22(1): 85-95.
CrossRef
Rogers CE and Mason RP (1966) Some recent advances in short-duration aerodynamic testing techniques, AIAA Paper 66-762.
Sahoo N (2003) Simultaneous measurement of aerodynamic forces and convective surface heat transfer rates for large angle blunt cones in hypersonic shock tunnel, PhD Thesis, Indian Institute of Science, Bangalore, India.
Sahoo N, Mahapatra DR, Jagadeesh G, Gopalakrishnan S and Reddy KPJ (2003) An accelerometer balance system for measurement of aerodynamic force coefficients over blunt bodies in a hypersonic shock tunnel, Measurement Science and Technology, 14: 260-272.
CrossRef
Sahoo N, Kulkarni V, Saravanan S, Jagadeesh G and Reddy KPJ (2005) Film cooling effectiveness on a large angle blunt cone flying at hypersonic speed, Physics of Fluids 17(3): 1-11.
CrossRef
Sahoo N, Suryavamshi K, Reddy KPJ and Mee DJ (2005) Dynamic force balances for shortduration hypersonic testing facilities, Experiments in Fluids 38: 606-614.
CrossRef
Sahoo N, Mahapatra DR, Jagadeesh G, Gopalakrishnan S and Reddy KPJ (2007) Design and analysis of a flat accelerometer based force balance for shock tunnel testing, Measurement, 40 (1): 93-106.
CrossRef
Sanderson SR and Simmons JM (1991) Drag balances for hypervelocity impulse facilities, AIAA Journal, 29(12): 2185-2191.
CrossRef
Simmons JM (1995) Measurement techniques in high-enthalpy hypersonic facilities, Experimental Thermal and Fluid Science, 10: 454-469.
CrossRef
Sirohi J and Chopra I (2000) Fundamental understanding of piezoelectric strain sensors, Journal of Intelligent Material Systems and Structures 11: 246-257.
CrossRef
Smith AL and Mee DJ (1996a) Dynamic strain measurement using piezoelectric polymer film, Journal of Strain Analysis for Engineering Design 31(6): 463-465.
CrossRef
Smith AL and DJ. Mee (1996b), Drag measurements in a hypervelocity expansion tube, Shock Waves 6(3): 161-166.
CrossRef
Smith AL, Mee DJ, Daniel WJT and Shimoda T (2001) Design, modelling and analysis of a sixcomponent force balance for hypervelocity wind tunnel testing, Computers and Structures, 79: 1077-1088.
Stalker RJ, Paull A, Mee DJ, Morgan RG and Jacobs PA (2005), Scramjets and shock tunnels - The Queeensland experience, Progress in Aerospace Sciences, 41: 471-513.
CrossRef
Storkmann V, Olivier H and Gronig H (1998) Force measurement in hypersonic impulse facilities, AIAA Journal, 36(3): 342-348.
CrossRef
Strawa AW, Chapman GT, Canning TN and Arnold JO (1991) Ballistic range and aerothermodynamic testing, Journal of Aircraft, 28(7): 443-449.
CrossRef
Tuttle SL, Mee DJ and Simmons JM (1995) Drag measurement at Mach 5 using a stress wave force balance, Experiments in Fluids 19(5): 336-341.
Van Dyke MD (1958) The supersonic blunt body problem - Review and extension, Journal of Aerospace Sciences, 25: 485-496.
CrossRef
Vidal RJ (1956) Model instrumentation techniques for heat transfer and force measurements in a hypersonic shock tunnel, Cornell Aeronautic Laboratory Report WADC TN 56-315.
Viren M, Saravanan S and Reddy KPJ (2002) Shock tunnel study of spiked aerodynamic bodies flying at hypersonic Mach number, Shock Wave 12: 197-204.
CrossRef
Wyborny W and Requardt G (1974) A new aerodynamic free flight testing system for sixcomponent measurements in short duration wind tunnels, AIAA Paper 74-613.