| Hucho W. H., 1998, Aerodynamics of road vehicle-Ann. Rev. Fluid Mech. 25, pp. 485-537 CrossRef | |
| Ahmed S. R., Ramm R. & Falting G., 1984, Some salient features of the time averaged ground vehicle wake, SAE technical paper series 840300, Detroit 1984 | |
| Gad-El-Hak M., 1996, Modern developments in flow control, Applied Mechanics reviews, 9, pp. 365-379. | |
| Gad-El-Hak M, Pollard A, Bonnet J, editors. 1998, Flow control: fundamentals and practices, Berlin: Springer. | |
| Collis, S. S., Joslin R. D., Seifert A., Theofilis V., 2004, Issues in active flow control: theory, control, simulation, and experiment, Progress in Aerospace Sciences, 40, 237-289. CrossRef | |
| Bewley T., Liu S., 1998, Optimal and robust control and estimation of linear paths to transition. J Fluid Mech., 365:305-49. CrossRef | |
| Cathalifaud P, Luchini, P., 2002, Optimal control by blowing and suction at the wall of algebraically growing boundary layer disturbances. In: Saric W, Fasel H, editors. Proceedings of the IUTAM laminar-turbulent symposium, V. Sedona, AZ, USA, p. 307-12. | |
| Seifert A., Bachat T., Koss D., Shepshelovich M. & Wygnanski I., "Oscillatory blowing: Atool to delay boundary-layer separation", AIAA Journal, Vol. 31, No.11, pp.2052-2060, 1993. CrossRef | |
| Glezer A. and Amitay M., 2002, Synthetic jets, Annu. Rev. Fluid Mech. 34, 503. CrossRef | |
| Kourta A. and Vitale E., 2008, Analysis and control of cavity flow, Phys. Fluids 20, 077104. CrossRef | |
| Gilliéron P., 2002, Contrôle des écoulements appliqués à l'automobile. Etat de l'art, Mécanique & Industries 3, pp 515-524 | |
| Bourgois S & Tensi J., 2003, Contrôle de l'écoulement par autour d'un cylindre par techniques fluidiques et acoustiques, 16eme Congrès Français de Mécanique, Nice. | |
| Fournier G., Bourgois S., Pellerin S, Ta Phuoc L, Tensi J. & El Jabi, R., 2004, Wall suction influence on the flow around a cylinder in laminar wake configuration by Large Eddy Simulation and experimental approaches, 39e Colloque d'Aérodynamique Appliquée, Contrôle des écoulements, 22-24 Mars, Paris. | |
| Rouméas M., Gilliéron P. & Kourta A., 2005, Réduction de traînée par contrôle des décollements autour d'une géométrie simplifiée: Etude paramétrique 2D, 17ème Congrès Français de Mécanique, 29 Août au 02 Septembre 2005, Troyes | |
| Onorato M., Costelli A. F. & Garonne A., 1984, Drag measurement through wake analysis, SAE, SP-569, International congress and Exposition, Detroit 1984 | |
| Spohn A. & Gilliéron P., 2002 Flow Separations Generated by a Simplified Geometry of an Automotive Vehicle, Congrès IUTAM Symposium on Unsteady Separated Flows, April 8-12, 2002, Toulouse, France | |
| Beaudoin J.F, Cadot O., Aider J. L., Gosse K., Paranthoën P., Hamelin B., 2004, Cavitation as a complementary tool for automotive aerodynamics, Experiments in Fluids, 37 pp. 763-768 CrossRef | |
| Rouméas M., Gilliéron P. & Kourta A., 2008, Separated flows around the rear window of a simplified car geometry, Journal of Fluid Engineering, vol. 130 /021101-1 | |
| Rouméas, M., Contribution à l'analyse et au contrôle du sillage épais par aspiration ou soufflage continu, PHD Thesis, Thèse de Doctorat, INP Toulouse, 2006. | |
| Gilliéron P. & Kourta A., Aerodynamic drag reduction by vertical splitter plates, Experiments in Fluids, 48(1), pp. 1-16, 2010, DOI: 10.1007/s00348009-0705-7. CrossRef | |
| Pujals G., Depardon S., Cossu C., Drag reduction of a 3D bluff body using coherent streamwise Streaks, Exp Fluids (2010) 49:1085-1094 DOI 10.1007/s00348-010-0857-5 CrossRef | |
| Fourié G., Keirsbulck L, P. Gilliéron, L. Labraga, Bluff-body drag reduction using a deflector, Exp Fluids (2011) 50:385-395 DOI 10.1007/s00348-0100937-6 CrossRef | |
| Bruneau CH, Mortazavi I (2008) Numerical modelling and passive flow control using porous media. Comput Fluids 37(5):488-498 CrossRef | |
| Boucinha V., Weber R., Kourta A., Drag reduction of a 3D bluff body using plasma actuators, Int. J. Aerodynamics, Vol. 1, Nos. 3/4, pp 262-281, 2011. CrossRef | |
| Aubrun S., Alvi F., Kourta A., Separation flow control on a generic ground vehicle using steady microjet arrays, AIAA conference, 5th Flow control conference, 28 June-1 July 2010, Chicago, USA. | |
| Aubrun S., Alvi F., Leroy A., Kourta A., Active flow control of the 3D separation on Ahmed body using steady microjet arrays, Proceedings of the 3rd Joint US-European Fluids Engineering Summer Meeting FEDSM2010, August 1-5, 2010, Montreal, Canada. | |
| Pastoor M, Henning L, Noack BR, King R, Tadmor G (2008) Feedback shear layer control for bluff body drag reduction. J Fluid Mech 608:161-196 | |
| Bideaux E., Bobiller P., Fournier E., Gilliéron P., Gilotte P., El Hajem M., Champagne J. Y., Kourta A., Drag reduction by pulsed jets on strongly unstructured wake: towards the square back control, Int. J. Aerodynamics, Vol. 1, Nos. 3/4, pp 282-298, 2011. CrossRef | |
| Krajnovic, S. and Fernandes J., Numerical Simulation of the Flow Around a Simplified Vehicle Model with Active Flow Control, International Journal of Heat and Fluid Flow, doi:10.1016/j.ijheatfluidflow.2010.06.007 | |
| Brunn A, Wassen E, Sperber D, Nitsche W, Thiele F (2007) Active drag control for a generic car model. Notes Numer Fluid Mech Multidiscip Design 95:247-259 | |
| Eichinger S., Tiele F., Wassen E., LES of active separation control on bluff bodies by steady blowing, Proceedings of ASME 2010 3rd Joint US, European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010-ICNMM2010, August 2-4, 2010, Montreal, Quebec, Canada | |
| Kotapati R. B., Mittal R., Cattafesta III L. N., Numerical study of a transitional synthetic jet in quiescent external flow, J. Fluid Mech. (2007), vol. 581, pp. 287-321. CrossRef | |
| Jain M., Puranik B., Agrawal A., A numerical investigation of effects of cavity and orifice parameters on the characteristics of a synthetic jet flow, Sensors and Actuators A 165 (2011) 351-366 | |
| Rouméas M., Gilliéron P. & Kourta A, Drag reduction by flow separation control on a car after body, Int. J. Numer. Meth. Fluids (2008) DOI: 10.1002/fld.1930 | |
| Chen S., Chen H., Martinez D. & Matthaeus W., 1991, Lattice Boltzmann Model for simulation of magnetohydrodynamics, Phys. Rev. Lett., 67, pp 3776-3779. CrossRef | |
| Rouméas M., Gilliéron P. & Kourta A., 2008, Analysis and control of the near-wake flow over a square-back geometry, Computers and Fluids, 38, 2009, pp. 60-70, doi:10.1016/j.compfluid.2008.01.009. CrossRef | |
| Chen S., Chen H. & Matthaeus W., 1992, Recovery of the Navier-Stokes equations using a latticegas Boltzmann method, Phys. Rev. Ann., 45, R5339-42 | |
| Bhatnagar P. L., Gross E. P. & Krook M., 1954, A model for collision processes in gases. Small amplitude processes in charged and neutral one-component systems. Phys. Rev., 94(3), pp 511-525. CrossRef | |
| Chen H., Teixeira C. & Molvig K., 1997, Digital Physics approach to computational fluid dynamics: some basic theoretical features, Int. J. Modern Phys. C, 8(4), pp. 675-684. CrossRef | |
| Yakhot V. & Orszag S. A., 1986, Renormalization group analysis of turbulence. Basic theory. Int J. Sci. Comput, 1, pp. 1-51 | |
| Pervaiz M. & Teixeira M., 1999, Two equation turbulence modeling with the lattice-Boltzmann method, proceedings of ASME PVP Division conference, 2nd International Symposium on Computational Technologies for Fluid/Thermal & Chemical systems with industrial applications, Boston. | |
| Gilliéron P. and Chometon F.; Modelling of stationary three-dimensional detached airflows around an Ahmed Reference Body, Third International Workshop on Vortex, ESAIM, Proceedings, Vol 7, 1999, pp 173-182, http://www.emath.fr/proc/Vol7/. http://www.emath.fr/proc/Vol7/ | |
| Lehugeur B., Gilliéron P. & Ivanic T., 2006, Contribution de l'éclatement tourbillonnaire à la réduction de la traînée des véhicules automobiles: approche numérique, C. R. Mécanique 334 pp. 368-372. CrossRef | |
| Krajnovic S. and Davidson L., 2005, Flow around a simplified car, part 1: Large Eddy Simulation, Journal of Fluid Engineering, 2005, 127, 907-918. CrossRef | |
| Krajnovic S. and Davidson L., 2005, Flow around a simplified car, part 2: Understanding the flow, Journal of Fluid Engineering, 2005, 127, 919-928. CrossRef | |
| Conan B., Antoine J., Planquart P., Experimental aerodynamic study on a car-type bluff body, 2011, Exp. Fluids, 50:1273-1284. CrossRef | |
| Lienhart H., Stoots C. & Becker S., "Flow and turbulence structures in the wake of a simplified car model (Ahmed model)", roc. DGLR Fach. Symp. Der AG STAB, Stuttgart, 2002. | |
| Leclerc, C., Réduction de la traînée d'un véhicule automobile simplifié à l'aide du contrôle actif par jet synthétique, PHD Thesis, Thèse de Doctorat, INP Toulouse, 2008. | |
| Vino G., Watkins S., Mousley P., Watmuff J. & Prasad S., "Flow structures in the near-wake of the Ahmed model", Journal of Fluids and Structures, No. 20, pp. 673-695, 2005. | |
| Serre E., Manguez M., Pasquitté R., Guilmineau E., Deng G. B., Kornhass M., Shäfer M., Fröhlich J., Hinterberger C., Rodi W., On simulating the turbulent flow around the Ahmed body: French-German collaborative evolution of LES and DES, Computers & Fluids (2011), doi:10.1016/j.compfluid.2011.O5.017 | |
| Boucinha V., Weber R., Kourta A., Drag reduction of a 3D bluff body using plasma actuators, Int. J. Aerodynamics, Vol. 1, Nos. 3/4, pp 262-281, 2011. CrossRef | |
| Minguez M., Pasquetti R., Serre E., High-order large-eddy simulation of flow over the "Ahmed body" car model, Physics of Fluids 20, 095101, 2008. CrossRef |
Drag Reduction with a Spanwise Synthetic Jet on a Generic Road Vehicle
Cédric LeclercRelated information
1 Renault, 1, avenue du Golf, 78288 GUYANCOURT, FRANCE
, Azeddine KourtaRelated information2 PRISME, Université d'Orléans, 8 rue Léonard de Vinci, 45072 ORLEANS Cedex 2, FRANCE