Papamoschou, D., “Mixing Enhancement Using Axial Flow,” AIAA Paper 2000-0093.
	Zaman, K.B.M.Q. and Papamoschou D., “Study of mixing enhancement observed with a coannular nozzle configuration,” AIAA Paper 2000-0094, 2000.
	Papamoschou D., Zill, A. and Johnson A., “Supersonic flow separation in planar nozzles,” Shock Waves, 2008, 19(3), 171-183. CrossRef
	Johnson, A.D. and Papamoschou D., “Instability of shock-induced nozzle flow separation,” to appear in Physics of Fluids.
	Xiao, Q., Tsai, H.M. and Papamoschou, D., “Numerical investigation of supersonic nozzle flow separation,” 2007, AIAA Journal, 45(3), 532-541. CrossRef
	Xiao, Q., Tsai, H.M., Papamoschou, D. and Johnson, A., “Experimental and numerical study of jet mixing from a shock-containing nozzle,” Journal of Propulsion and Power, 2009, 25(3), 688-696. CrossRef
	Chen, H.H. and Driscoll, J.F., “Nitric oxide levels of turbulent jet diffusion flames-effects of coaxial air and other mixing parameters,” 23rd Symposium on Combustion, 1990.
	Fric, T.F., “Effects of fuel-air unmixedness on NOx emmissions,” Journal of Propulsion and Power, 1993, 9(5), 708-713. CrossRef
	Schetz, J.A., Hewitt, P.W. and Situ, M., “Transverse jet breakup and atomization with rapid vaporization along the trajectory,” AIAA Journal, 1985, 23(4), 254-261. CrossRef
	Hermanson, J.C., Papas, P. and Kay, I.W., “Structure and penetration of a supersonic fluid jet in supersonic flow,” Journal of Propulsion and Power, 1994, 10(3), 387-393. CrossRef
	Tillman, T.G., Paterson, R.W. and Presz, W.M., “Supersonic Nozzle Mixer Ejector,” Journal of Propulsion and Power, 1992, 8(2), 513-519. CrossRef
	Sato, H., Mori, M. and Nakamura, T., “Development of a dry ultra low NOx double swirler staged gas turbine combustor,” Journal of Engineering for Gas Turbine and Power, 1998, 120(1), 41-47. CrossRef
	Harari, R. and Sher, E., “Optimization of a plain-jet airblast atomizer,” Atomization and Sprays, 1997, 7(1), 97-113. CrossRef
	Westley, R. and Lilley, G.M., “An investigation of the noise field from a small jet and methods for its reduction,” College of Aeronautics, Report 53, Cranfield Univ., England, UK, 1952.
	Seiner, J.M. and Gilinski, M.M., “Nozzle thrust optimization while reducing jet noise,” AIAA Journal, 1997, 35(3), 420-427. CrossRef
	Ahuja, K.K. and Brown, W.H., “Shear flow control by mechanical tabs,” AIAA-89-0994, 1989.
	Zaman, K.B.M.Q., Reeder, M.F. and Samimy, M., “Control of an axisymmetric jet using vortex generators,” Physics of Fluids, 1994, 6(2), 778-796.
	Samimy, M., Kim, J.H., Clancy, P.S. and Martens, S., “Passive control of supersonic rectangular jets via nozzle trailing-edge modification,” AIAA Journal, 1998, 36(7), 1230-1239. CrossRef
	Seiner, J.M. and Grosch, C.E., “Mixing enhancement by tabs in round supersonic jets,” AIAA-98-2326, 1998.
	Zaman, K.B.M.Q., “Spreading characteristics of compressible jets from nozzles of various geometries,” Journal of Fluid Mechanics, 1999, 383, 197-228. CrossRef
	Samimy, M., Zaman, K.B.M.Q. and Reeder, M.F., “Effect of tabs on the flow and noise control of an axisymmetric jet,” AIAA Journal, 1993, 31, 609-619. CrossRef
	Yu, K.H. and Schadow, K.C., “Cavity-actuated supersonic mixing and combustion control,” Combustion and Flame, 1994, 99, 295-301. CrossRef
	Kumar, A., Bushnell, D.M. and Hussaini, M.Y., “Mixing augmentation technique for hypervelocity scramjets,” Journal of Propulsion and Power, 1989, 5(5), 514-521. CrossRef
	Dolling, D.S., Fournier, E. and Shau, Y.R., “Effect of vortex generators on the growth of a compressible shear layer,” Journal of Propulsion and Power, 1992, 8(5), 1049-1056. CrossRef
	Island, T.C., Urban, W.D. and Mungal, M., “Mixing enhancement in compressible shear layers via sub-boundary layer disturbances,” Physics of Fluids, 1998, 10(4), 1008-1020.
	Strykowksi, P.J., Krothapalli, A. and Jendoubi, S., “The effect of counterflow on the development of compressible shear layers,” Journal of Fluid Mechanics, 1996, 308, 63-96. CrossRef
	Van der Veer, M.R. and Strykowski, P.J., “Counterflow thrust vector control of subsonic jets: continuous and bistable regimes,” Journal of Propulsion and Power, 1997, 13(3), 412-420. CrossRef
	Raman, G., “Using controlled unsteady fluid mass addition to enhance jet mixing,” AIAA Journal, 1997, 35(4), 647-656. CrossRef
	Weber, Y.S. and Bowers, D.L., “Advancements in exhaust system technology for the 21st century,” AIAA-98-3100, 1998.
	Smith, B.L. and Glezer, A., “Vectoring and small-scale motions effected in free shear flows using synthetic actuators,” AIAA-99-0164, 1999.
	Li, H. and Ben-Dor, G., “Mach reflection wave configuration in two-dimensional supersonic jets of overexpanded nozzles,” AIAA Journal, 1996, 36(3), 488-491. CrossRef
	Romine, G.L., “Nozzle flow separation,” AIAA Journal, 1998, 36(9), 1618-1625. CrossRef
	Wilmoth, R.G. and Leavitt, L.D., “Navier stokes predictions of multi-function nozzle flows,” Society of Automotive Engineers Transactions, 1987, 96(6), 6.865-6.879.
	Hamed, A. and Vogiatzis, C., “Overexpanded two-dimensional convergent-divergent nozzle flow simulations, assessment of turbulence models,” Journal of Propulsion and Power, 1997, 13(3), 444-445. CrossRef
	Hamed, A. and Vogiatzis, C., “Overexpanded two-dimensional convergent-divergent nozzle flow performance, effects of three-dimensional flow interactions,” Journal of Propulsion and Power, 1998, 14(2), 234-240. CrossRef
	Hunter, C.A., “Experimental, theoretical and computational investigation of separated nozzle flows,” AIAA-98-3107, 1998.
	Morrisette, E.L., and Goldberg, T.J., “Turbulent Flow Separation Criteria for Overexpanded Supersonic Nozzles,” NASA TP 1207, 1978.
	Reshotko, E., and Tucker, M., “Effect of a Discontinuity on Turbulent Boundary Layer Thickness Parameters with Application to Shock-Induced Separation,” NACA TN-3454, 1955.
	Murakami, E. and Papamoschou, D. “Mean Flow Development in Dual-Stream Compressible Jets,” AIAA Journal, 2002, 40(6), 1131-1138. CrossRef