Seifert, A., Bachar, T., Koss, D., Shepshelovich, M., and Wygnanski, I., “Oscillatory Blowing: A Tool to Delay Boundary-Layer Separation,” AIAA Journal, Vol. 31, No. 11, 1993, pp. 2052-2060. CrossRef
	Wang, H., and Menon, S., “Fuel-Air Mixing Enhancement by Synthetic Microjets,” AIAA Journal, Vol. 39, No. 12, 2001, pp. 2308-2319. CrossRef
	Mahalingam, R., and Glezer, A., “Design and Thermal Characteristics of a Synthetic Jet Ejector Heat Sink,” Journal of Electronic Packaging, Vol. 127(2), 2005, pp. 172-177. CrossRef
	Smith, B. L., and Glezer, A., “Jet Vectoring using Synthetic Jets,” Journal of Fluid Mechanics, Vol. 458, 2002, pp. 1-24.
	Gallas, Q., Holman, R., Nishida, T., Carroll, B., Sheplak, M., and Cattafesta, L., “Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators,” AIAA Journal, Vol. 41, No. 2, 2003, pp. 240-247. CrossRef
	Glezer, A., and Amitay, M., “Synthetic Jets,” Review of Fluid Mechanics, Vol. 34, 2002, pp. 503-529. CrossRef
	Holman, R., Utturkar, Y., Mittal, R., Smith, B. L., and Cattafesta, L., “Formation Criterion for Synthetic Jets,” AIAA Journal, Vol. 43, No. 10, 2005, pp. 2110-2116. CrossRef
	Raju, R., Aram, E., Mittal, R., and Cattafesta, L. N., “Simple Models of Zero-Net Mass-Flux Jets for Flow Control Simulations,” International Journal of Flow Control , Vol. 1, No. 3, 2009.
	Kral, L. D., Donovan, J. F., Cain, A. B., and Cary, A. W., “Numerical Simulation of Synthetic Jet Actuators,” AIAA Paper 97-1824, 1997.
	Rizzetta, D. P., Visbal, M. R., and Stanek, M. J., “Numerical Investigation of Synthetic-Jet Flow Fields,” AIAA Journal, Vol. 37, No. 8, 1999, pp. 919-927. CrossRef
	Filz, C., Lee, D., Orkwis, P. D., and Turner, M. G., “Modeling of Two Dimensional directed Synthetic Jets using Neural Network-based Detereministic Source Terms,” AIAA Paper 2003-3456, 2003.
	Yamaleev, N. K., and Carpenter, M. H., “A Reduced-Order Model for Efficient Simulation of Synthetic Jet Actuators,” NASA Technical Reports, NASA/TM-2003-212664, 2003.
	Rathnasingham, R. and Breuer, K. S., “Coupled Fluid-Structural Characteristics of Actuators for Flow Control,” AIAA Journal, Vol. 35, No. 5, 1997, pp. 832-837. CrossRef
	Agashe, J., Arnold, D. P., and Cattafesta, L., “Lumped Element Model for Electrodynamic Zero-Net Mass-Flux Actuators,” AIAA Paper 2009-1308, January 2009.
	Byrganhalli, R. R., “Numerical Study of Three Dimensional Synthetic Jets in Quiescent and External Grazing Flows,” D.Sc. Thesis, 2007, Mechanical and Aerospace Engineering, The George Washington University, Washington, DC.
	Tang, H., Zhong, S., Jabbal, M., Garcillan, L., Guo, F., Wood, N. J., and Warsop, C., “Towards the Design of Synthetic-Jet Actuators for Full-Scale Flight Conditions. Part 2: Low-dimensional Atuator Prediction Models and Actuator Design Methods,” Flow, Turbulence and Combustion, Vol. 78, No. 3, 2007, pp. 309-329. CrossRef
	Utturkar, Y., Mittal, R., Rampungoon, P., and Cattafesta, L., “Sensitivity of Synthetic Jets to the Design of the Jet Cavity,” AIAA Paper 2002-0124.
	Raju, R., “Scaling Laws and Separation Control Strategies for Zero-Net Mass-Flux Actuators,” D.Sc. Thesis, 2008, Mechanical and Aerospace Engineering, The George Washington University, Washington, DC.
	Kotapati, R. B., Mittal, R., and Cattafesta, L. N., “Numerical Study of Transitional Synthetic Jet in Quiescent External Flow,” Journal of Fluid Mechanics, Vol. 581, 2007, pp. 287-321. CrossRef
	Mittal, R., Dong, H., Bozkurttas, M., Najjar, F., Vargas, A., and Loebbecke, A., “A Versatile Immersed Boundary Method for Incompressible Flows with Complex Boundaries,” Journal of Computational Physics, Vol. 227, No. 11, 2008, pp. 4825-4852. CrossRef
	Na, Y., and Moin, P., “Direct Numerical Simulation of a Separated Turbulent Boundary Layer,” Journal of Fluid Mechanics, Vol. 370, 1998, pp. 175-201. CrossRef