| SURGICAL TECHNIQUE |
|
| Year : 2013 | Volume
: 5
| Issue : 1 | Page : 18-20 |
|
|
A simple technique for adjustment of the femoral offset at the site of hip spacer implantation
Konstantinos Anagnostakos, Olaf Lorbach, Patrick Orth, Katrin Koch
Department of Orthopaedic Surgery, Saarland University Medical Center, Homburg/Saar, Germany
Correspondence Address:
Konstantinos Anagnostakos
Department of Orthopaedic Surgery, Saarland University Medical Center, Kirrbergerstr. 1, D 66421, Homburg/Saar
Germany
 Source of Support: None, Conflict of Interest: None
DOI: 10.4103/2006-8808.118605
|
|
|
The decrease of femoral offset might play a role in the emergence of hip spacer dislocations, but it has not been discussed in the literature yet. The present work describes a technique for femoral offset adjustment. Either a bended blade plate or a dynamic hip screw can be used. The depth of the insertion and the angle of the particular implant are defined by the size of the offset adjustment required in each case. The described technique is feasible to produce a customized hip spacer, allowing for the preservation of an adequate muscle tension by individual adjustment of the femoral offset between stages. |
|
|
|
| [FULL TEXT] [PDF]* |
|
 |
|
