Access provided by Rice University

Martin, N. J. and Holzhauser, C. A., "An Experimental Investigation at Large Scale of Several Configurations of an NACA Submerged Air Intake," No. A8F21, National Advisory Committee for Aeronautics (NACA), Ames Aeronautical Laboratory, Moffett Field, California, October 1948.
Mossman, E. A. and Randall, L. M., "An Experimental Investigation of the Design Variables for a NACA Submerged Duct Entrances," No. A7I30, National Advisory Committee for Aeronautics(NACA), Ames Aeronautical Laboratory, Moffett Field, California, January 1948.
Rolls, L. S., "A Flight Comparison of a Submerged Inlet and a Scoop Inlet at Transonic Speeds", No. A53A06, March 1953.
Rabe, A, Wing, N. and Burdisso, R., "Effectiveness of a Serpentine Inlet Duct Flow Control Technique at Design and Off-Design Simulated Flight Conditions," No. GT2004-53475, ASME Turbo Expo, Vienna Austria, June 2004.
Williams, T. and Cousins, P., "History, Philosophy, Physics, and Future Directions of Aircraft Propulsion System/Inlet Integration," No. GT2004-54210, ASME Turbo Expo, Vienna Austria, June 2004.
Sobester, A., "Tradeoffs in Jet Inlet Design: A Historical Perspective," AIAA Journal of Aircraft, Vol. 44, No. 3, May-June 2007, pp. 705-717.
Axelson, J. A. and Taylor, R. A., "Preliminary Investigation of the Transonic Characteristics of an NACA Submerged Inlet," No. A50C13, National Advisory Committee for Aeronautics(NACA), Ames Aeronautical Laboratory, Moffett Field, California, June 1950.
Divine, D. J., Watterson, J. K., Cooper, R. K., and Richardson, J., "An Investigation into Improving the Performance of Low Speed Auxiliary Air Inlets Using Vortex Generators," AIAA paper 2002-3264, St. Louis, Missouri, June 2002.
Lee, J. G., Jung, S. Y., Ahn, C. S., "Numerical Simulation of Three-Dimensional Flows for Flush Inlet," AIAA Paper 2004-5190, Providence, Rhode Island, August 2004.
Lee, B. J., Kim, C., Rho, O.-H., "Optimal Shape Design of the S-Shaped Subsonic Intake Using NURBS," AIAA paper 2005-0455, Reno, Nevada, January 2005.
Taylor, R. A., "Some Effects of the Side-Wall Modification on the Drag and Pressure Recovery of an NACA Submerged Inlet at Transonic Speeds",NACA, February 1952.
Jovanovic, V., Taskinoglu, E., Knight, D., Elliott, G., "Experimental Investigation of a Submerged Inlet," AIAA Journal, Vol. 22, No. 1, January 2006, pp. 214-217.
Jovanovic, V.,Taskinoglu, E., Knight, D., Elliott, G., "Experimental Investigation of a Submerged Subsonic Inlet-Part II," No. 2004-4842, Providence, Rhode Island, August 2004.
Taskinoglu, E., Knight, D., "Design Optimization for Submerged Inlets- Part I," No. AIAA 2003-1247, Reno, Nevada, January 2003.
Florea, R., Hass, M., Lents, C. E., and Stucky, M. B., "Optimization of Bleed-Flow-Control for an Aggressive Serpentine Duct,", AIAA Paper 2005-1205, January 2005, 43rd AIAA Aerospace Sciences Meeting and Exhibit.
Vaccaro, J. C., Sanhi, O., Olles, J., Jansen, K. E., and Amitay, M., "Experimental and Numerical Investigation of Active Flow Control of Inlet Ducts," International Journal of Flow Control, Vol. 1, No. 2, pp. 133-154, 2009.
Wilson, D. G., Korankianitis, T., The Design of High-Efficiency Turbomachinery and Gas Turbines, 2nd Edition, Prentice Hall, 1998.
Glawe, D. D., Samimy, M., Nejad, A. S., and Chen, T. H., "Effects of Nozzle Geometry on Parallel Injection into a Supersonic Flow," AIAA Journal of Propulsion and Power, Vol. 12, No. 6, November-December 1996.
Three-Color, Five-Beam, Three Component Laser Doppler Anemometer System, Dantec Electronics, New Jersey, RFQ F33601-86-R-0297, August 1986.
Byrne, G. D., James, S. W., Tatam, R. P., "A Single-head Fibre Optic Laser Doppler Anemometer Probe for the Measurement of Flow Angles," Measurement Sciences and Technology, Institute of Physics Publishers, United Kingdom, No. 15, 2004.
Berger, S. A., Talbat, L., and Yao, L.-S., "Flow in Curved Pipes," Fluid Mechanics, 1983, pp. 461-512.
Reeder, M. F.; Crafton, J. W.; Estevadeordal, J.; DeLapp, J.; McNiel, C.; Peltier, D.; Reynolds, T., "Clean Seeding for Flow Visualization and Velocimetry Measurements." Experiments in Fluids, Vol. 48, No. 5, pp. 889-900, 2010.
Gas Turbine Engine Inlet Flow Distortion Guidelines, Aerospace Recommended Practices, Revision B, ARP (1420), SAE, Pennsylvania, 2002.
Wilcox, D. C., Turbulence Modeling for CFD, 2nd Edition, DCW Industries, California, 1998.
Scribben, A. R. and Goettke, M. K., Reactive Conformal Inlet Technology Enhancement (RECITE), Integration and Demostration Branch, Aeronautical Science Division, AFRL-RB-WPTR-2008-3134, AFRL, July 2008.
< >

Issue Details

International Journal of Flow Control

Related Content Search

Find related content

By Author

Subscription Options

Individual Offers